Forums > Windsurfing General

Severne race sail cams

Reply
Created by Subsonic 2 months ago, 25 Nov 2022
Subsonic
WA, 2712 posts
25 Nov 2022 6:09PM
Thumbs Up

Got the mach 5s the other day, and just discovered the 6.2 comes with rdm cams as standard. I don't own an rdm 430 mast.

So with racing on tomorrow, shops shut for the weekend and the strong possibility that 6.2 will be required, does anyone know if the sdm cams are a standard fitting? Can i pull the cams out of my old mach 1 6.2 (which fits on an apex mast) and stick them in the new one? Or do they tend to vary them year to year? I suspect i can, but figured id ask brains trust before i go burning an hour changing it all over and rigging it tomorrow, only to discover that actually i can't

lefthanders
WA, 23 posts
25 Nov 2022 9:02PM
Thumbs Up

Do you have a 400 rdm?

That will work fine in the M5 6.2 with a wave grenade / cyclops 36cm rdm extension (luff is 433)

SurferKris
194 posts
25 Nov 2022 10:17PM
Thumbs Up

The SDM cams from last years sail should fit, as far as I know, but I don't own any Mach 5s myself.

I.e. SDM cams for Apex masts should be fine.

Subsonic
WA, 2712 posts
26 Nov 2022 4:47AM
Thumbs Up

Thanks fellas. Will give the 400 rdm i've got a go if need be

Ben1973
831 posts
26 Nov 2022 5:04AM
Thumbs Up

Cams in my m1 are the same as my m4 if that helps and swapping between Sdm and rdm and should work

Henners
268 posts
26 Nov 2022 10:01AM
Thumbs Up

Select to expand quote
Subsonic said..
Thanks fellas. Will give the 400 rdm i've got a go if need be


Good luck with your race.



Subscribe
Reply

Forums > Windsurfing General


"Severne race sail cams" started by Subsonic