Forums > Kitesurfing General

Kite surfboard deck screws

Reply
Created by bramber > 9 months ago, 24 Sep 2021
bramber
VIC, 134 posts
24 Sep 2021 10:54AM
Thumbs Up

Are kite surfboard deck screws standardised? What metric are they? I have a cabrinha spade I need screws for (as might be obvious in my other recent post), what ones fit?

Kamikuza
QLD, 6493 posts
24 Sep 2021 6:57PM
Thumbs Up

Probably looks something like this:

Or go through the parts section on the Cabrinha page...
www.cabrinha.com/collections/all?page=1

Are they standardized? Dunno. I bet they're Imperial though

Peahi
VIC, 1467 posts
24 Sep 2021 9:16PM
Thumbs Up

you'll probably find, if not screwed in before, that most bolts will fit as the inserts are plastic and will mold to shape of screw. They have to be strong marine grade steel

I might have a few spare but also try SHQ I think sell them for $5 each

KiteBud
WA, 1515 posts
25 Sep 2021 5:49PM
Thumbs Up

Hi Bramber,

I'm pretty sure you need the ones Kamikuza suggested.

We sell those on our website here: www.kitebud.com.au/product/airush-surfboard-footstrap-screws-and-washers/

Christian

bramber
VIC, 134 posts
25 Sep 2021 11:43PM
Thumbs Up

Wouldnt such screws come with a set of surf straps already?

KiteBud
WA, 1515 posts
26 Sep 2021 8:55AM
Thumbs Up

Select to expand quote
bramber said..
Wouldnt such screws come with a set of surf straps already?


Sometimes yes, sometimes no

Gorgo
VIC, 4911 posts
26 Sep 2021 11:04AM
Thumbs Up

I've always used 12 gauge stainless steel self-tapper/wood screws. You can buy them anywhere.

I check the depth of the hole in the inserts, add a bit for the fitting on the end of the strap, screw them in.

After seeing "proper" strap screws I might file the point off a little to reduce any chance of the screws poking through the insert.

I've always used Phillips head screws and either a ratchet or impact driver to put the screws in. They allow the screws to be screwed tight but slowly with more control and no slipping.

A couple of years ago I switched to Torx screws with the security pin for straps and foils. The socket is twice as deep as hex and plain Torx and the security pin locks the driver into place. I've had zero wear or damage on screws since.

gdownie
NSW, 141 posts
29 Sep 2021 6:41AM
Thumbs Up

National course,national fine,metric,imperial are some of the threads only. these days nere is no such thing as standard with china making up some new threads also
we have a industrial supplies company near us so may be easier to take board down there if you have something similar to "blackwoods" to match size and thread type.

airsail
QLD, 1241 posts
29 Sep 2021 8:04AM
Thumbs Up

Once you pick the type of screw you use, either the ones available from hardware/chandlers or the actual foot strap type as pictured, never change.
They have a different thread pitch, and once the screw cuts its thread in the plastic insert stick with that type screw, otherwise you run the risk of stripping the insert.

RayQ
WA, 633 posts
30 Sep 2021 3:17PM
Thumbs Up

If the insert is SS or brass, probably M6

way things are going, you will have to buy the air for your kite. separately, every time you want to kite



Subscribe
Reply

Forums > Kitesurfing General


"Kite surfboard deck screws" started by bramber